Round Trip Drives

MileIQ makes it easier than ever to classify, recognize, and edit your round trip drives on the mobile app! Drives with the same start and end location will be grouped together into a round trip drive card.  

Classifying Round Trip Drives

Once MileIQ has detected that you've take a round trip drive from a location and back to the same location, a round trip drive card will show up. The start and stop locations, mileage, time, and duration of the stop between the round trip drives will be shown within the drive card.

This image shows a round trip drive card on the mobile app.

Business / Personal Classification

Similar to classifying a single drive card, a simple swipe across the screen in either direction (swipe left for business or swipe right for personal) will classify a round trip drive.

This image shows a drive card swiped to the right for business.

Custom Purpose Classification

Swiping a round trip card halfway across the screen will reveal an “Add a Purpose” prompt. Releasing the drive card at this point will bring up the MileIQ Custom Purpose grid with secondary classifications related to the primary category. Simply tap on the correct purpose, and the round  trip drive is now classified with the custom purpose. For more information on Custom Purposes, please see the How to: Create Custom Drive Purpose article.

Once you classify the round trip drive, the drive card will no longer be shown on the MileIQ mobile app. To review and make additional changes to the round trip drive, visit the MileIQ Web Dashboard.

Editing Round Trip Drives Details

It is easy to add information about Parking, Tolls, Vehicle or other Notes to your round trip drives. Simply tap the Notepad Icon on the bottom left of the drive card before classifying the drive. The notepad will reveal the Parking, Tolls, and Notes space to enter this additional information.

This image shows the note tab view of a drive card.

If a Parking or Toll fee is added to the round trip drive card, a prompt will appear. You can choose to apply the parking fee to the first leg of the drive, the returning leg of the drive, or both drives.

This image shows the options to apply a parking fee to the first leg of the drive, the returning leg of the drive, or both drives on the drive card.

Any notes or vehicle added to the round trip drive will be added to both drives when the drives are viewed on the MileIQ Web Dashboard

Ungrouping Round Trip Drives

If you would like to classify each way of the round trip drive separately, simply click ‘Ungroup’ at the top right corner of the drive card.

This image shows the round trip drive card, highlighting the ungroup button on the top right of the drive card.

A confirmation screen will appear. Click ‘Ungroup’ to finish ungrouping the drives. Once ungrouped, the two drives will appear as two separate drive cards.

This image shows the confirmation screen of the Ungroup drive, highlighting the ungroup button.

Additional Information

This feature is not yet available for multi-stop round trips.  

Was this article helpful?
10 out of 17 found this helpful